The T Series Gantry Crane is fabricated from heavy gauge square mechanical tubing, offer the greatest under I-Beam height and range of adjustability, maximum flexibility of span, height and tread adjustment allows use on uneven flooring. Adjustability allows travel through doorways and aisles, under mezzanines or other overhead obstructions.
Steel Construction - Capacities to 10 Ton
- Maximum Overall Heights to 24'-3"
-
Standard Spans to 40'-0"
Steel Construction with Aluminum I Beam - Capacities to 3 Ton
True "A Frame" Design
Virtually eliminates the swaying motion common to other three  way adjustable gantry designs and gives a greater stability while allowing the I-Beam to pivot independently of the legs and to self-center over the load.
Construction
The main legs, brace legs, and caster frames are constructed of heavy gauge square tubing. Zinc plated hardware ensure longevity.
Adjustable Span
Spanloc® ensures secure positioning of the I-beam while allowing span adjustment for inboard / outboard bracing or cantilever configuration. Cantilever capacity is 25% of regular capacity (max cantilever of 4'). Counterweight is required for cantilever.
Adjustable Height
The main legs adjust at six-inch intervals to accommodate uneven floor levels. The height of the main legs is adjusted by inserting or removing a pair of push/pull pins.
Adjustable Tread
The caster frame tread easily adjusts to allow movement through narrow passageways. A cable assembly, bolted inside the caster frame tubes, prevents overspreading when tread width is adjusted. Tread should increase as height increases
Casters
Four-position, swivel lock casters with moldon polyurethane wheens protect floors from standard.
 |
